- Infrared ikanam oriọna -

503IRBT-94L / 16I120-45A

Igwe ọkụ infrared 5mm a ka ejiri lens na-acha anụnụ anụnụ jikọta ya. Nke a bụ infrared ikanam Emitter, ụfọdụ ndị nwere ike iche na anyị agaghị ahụ ìhè ọ bụla nke agba mgbe ọkụ infrared a na-arụ ọrụ. Mana n'eziokwu, anyị nwere ike ịhụ obere ntụ na-acha uhie uhie ma ọ bụrụ na nnukwu ọkụ 940nm infrared LED oriọna na-arụ ọrụ. Projectfọdụ oru ngo nwere ike ọ gaghị anabata nke a-acha ọbara ọbara ọkụ, mgbe ahụ, anyị na-ngwugwu a na-acha anụnụ anụnụ oghere na-ekpuchi a mmezi ìhè. Need chọrọ ụfọdụ 940nm LED na 0.4W mmepụta maka ọrụ gị? Kpọtụrụ anyị maka ọdụ ọzọ banyere ya. E nwekwara ụdị ikiri ọhụụ maka ịhọrọ gị.

- Size nke 5 mm Iye Site-oghere ikanam -

* Nke a dịkwa maka LED ndị ọzọ, dị ka UV ikanam, IR LED (810nm LED, 850nm LED ...), Amber LED, Yellow LED, RGB LED, Blinking LED lamp *

- Na-arụ ọrụ Site-onu Iye ikanam -

* Igwefoto na-ese agba dị na foto ahụ, biko were agba agba dị ka ọkọlọtọ.

- Site-onu Iye Ikanam oke -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	1000mA
Forward Current	IF	120mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.1	1.2	1.4	V	IF=50mA
		1.2	1.4	1.5	V	IF=100mA
			2.0		V	IF=1000mA
Rediant Intensitye	Ee		9	13	mw/sr	IF= 50mA
		20		30	mw/sr	IF=100mA
			260		mw/sr	IF=1000mA
Luminous Power	PO		18		mw	IF=50mA
			45		mw	IF=100mA
			450		mw	IF=1000mA
Peak Wavelength	λP		940	950	nm	IF=20mA
Half Width	Dl		25		nm	IF=20mA
Viewing Half Angle	2q1/2		±22		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Njikọ waya ọla edo -

* Iji mee ka onye ọ bụla n'ime ogologo ndụ ọkụ, ụlọ ọrụ BestLED jiri waya ọla edo dị elu maka njikọ njikọ

- IR ikanam mbukota -

* Anyị nwere ike abịa a ikanam ọ bụla ọnụ ọgụgụ nke nchịkọta na taped ma ọ bụ gbagọrọ agbagọ Ikanam atụdo ka gị chọrọ.

- Ikanam ikanam -

- Production Usoro -

- T hrough-onu Iye ikanam -