- 830nm ikanam -

503FIRC-83L / 14I100-45A

- Size 5 mm Site-oghere ikanam -

* Mkpirisi nkenke bụ cathode.

- Site-onu Ikanam radiant -

* Igwefoto na-ese agba dị na foto ahụ, biko were agba agba dị ka ọkọlọtọ.

- Ntọala eletriki -

Ọnụ ọgụgụ kachasị elu na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	180mw
Pulse Forward Current	IFP	300mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	1000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara Anya na Eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.3	1.4	1.6	V	IF=20mA
		1.4	1.6	1.8	V	IF=60mA
		1.5	1.7	2.0	V	IF=100mA
Radiant Intensity	Φ	20		35	mw/sr	IF=20mA
		30		50	mw/sr	IF=60mA
		40		70	mw/sr	IF=100mA
Radiant Power	PO	8		18	mw	IF=20mA
		28		38	mw	IF=60mA
		48		58	mw	IF=100mA
Peak Wavelength	λP	825	830	838	nm	IF=20mA
Half Width	Dl		22		nm	IF=20mA
Viewing Half Angle	2q1/2		±60		deg	IF=20mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- 830nm Ikanam Ntụaka agba maka ịhazi XY -

* Iji mee ka onye ọ bụla n'ime ogologo ndụ ọkụ, ụlọ ọrụ BestLED jiri waya ọla edo dị elu maka njikọ njikọ

- Ikanam mbukota -

* Anyị nwere ike abịa a ikanam na ihe ọ bụla ọnụ ọgụgụ nke nchịkọta na taped ma ọ bụ gbagọrọ agbagọ Ikanam atụdo dị ka gị chọrọ.

- Ikanam ikanam -

- Production Usoro -

- T hrough-onu Iye ikanam -