- 3528 SMD Ikanam -

3528FIRC-85L14I100

Infrared IR 810nm LED are applicable to monitor infrared lighting, iris ude, ihu ugwo, infrared ihuenyo mmetụ, mmesho na njikwa, thermal na ngwa nbipute na ndị ọzọ na electronic. Na nso infrared LED high power 720nm / 810nm / 820nm / 830nm / 840nm / 860nm. Shenzhen Best ikanam Opto-electronic Co., Ltd nwere ike ngwugwu a 810nm ikanam iferi ịnwụ dị iche iche dị ka: ekesa Ikanam ect. 2835FIRC-81L / 14I100 bụ nnukwu arụmọrụ infrared emitting diode na GaAlAs na teknụzụ GaAs, kpụpụtara na ngwugwu plastik doro anya, na-acha ọcha. N'iji ya tụnyere ọkọlọtọ GaAs na teknụzụ GaAs ndị a na-erugharị na-enweta ihe karịrị 100% na-enwu ọkụ na-enwu ogologo n'ogologo yiri ya. Ọganihu voltages na-adị ugbu a na nke dị ugbu a na nke dị elu dị ugbu a kwekọrọ na ụkpụrụ dị ala nke teknụzụ ọkọlọtọ. Ya mere, ndị emitters a dabara adaba dị ka nnukwu arụmọrụ edochi nke ọkọlọtọ emitters. Gịnị bụ ihe dị iche n'etiti infrared SMD ikanam na infrared Site-oghere ikanam? Ihe nkuku bu ihe kachasi iche. Dị ka anyị si mara, SMD Ikanam bụ obere aha nke elu ugwu ngwaọrụ, nke pụtara na e nwere a ụgbọelu oghere maka ndị a Ikanam ukwuu n'ime (Ọ bụrụ na ị chọrọ n'ezie SMD Ikanam nwere n'akuku, anyị nwere ike tinye a oghere n'elu SMD Ikanam mgbe anyị Emechara mmepụta). N'aka nke ọzọ, maka oghere oghere, enwere ọtụtụ nkuku maka ịhọrọ, dị ka: ogo 10, ogo 30, ogo iri anọ na ise, ogo iri isii, ị ga-enweta ogologo oge radieshon mgbe ị họọrọ oghere dị warara karịa maka through-onu ikanam.

- Akụkụ Dimension -

Ihe ndị a SMD LED ahụ dịkwa maka IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Agba -

* Igwefoto na-ese agba dị na foto ahụ, biko were agba agba dị ka ọkọlọtọ.

- Ntọala eletriki -

Parameter	Symbol	Rating
Power Dissipation	Pd	200mw
Pulse Forward Current	IFP	500mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	3000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Bag
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Radiant Intensity	Ee		5	8	mw/sr	IF=20mA
		20		30		IF=50mA
		40		50		IF=100mA
Viewing Angle	2q1/2		120		deg	IF=50mA
Peak Wavelength	λp	850	855	865	nm	IF=50mA
Spectral Bandwidth	Dl		50		nm	IF=50mA
Forward Voltage	VF	1.2	1.35	1.6	V	IF=20mA
		1.3	1.55	1.7		IF=50mA
		1.6	1.7	2.0		IF=100mA
Reverse Current	IR			5	uA	VR=5V
*Luminous Intensity is measured by ZWL600.
*2q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- Njikọ ọla edo ọla edo -

- Mbukota -

* Anyị na-agbakọta ya na ngwugwu agụụ mgbe teepu ya dị ka eriri

- Ngwa -

- Ikanam ikanam -

- Mmepụta -

- Jiri -