A na -ejikarị LED infrared LED 900nm eme ihe iji nwalee gas ọbara na shuga ọbara nke ahụ mmadụ ma ọ bụ mkpọchi ọnọdụ. Ogologo ntụgharị dị iche iche ga -enwe ngwa dị iche iche. Dị ka 940nm LEDs zuru oke maka sistemụ njikwa ime obodo, dị ka njikwa anya nke ihe ndị ọzọ eji arụ ụlọ. 800-810nm infrared LED dị mma maka ahụike na akụrụngwa ịchọ mma, nkwukọrịta oghere oghere, ọkụ infrared, isi mgbapụta nke lase ect siri ike. A na-eji 830nm infrared emitter n'ọtụtụ ebe maka okporo ụzọ dị elu, sistemụ kredit akpaka ect. Ọ bụrụ na ịchọrọ ụfọdụ 900nm infrared LED emitter nwere obere nha na ngwaọrụ elu. 3528 SMD LED ndị a ga -abụ ezigbo nhọrọ maka gị ~ Kpọtụrụ anyị maka nkọwa ndị ọzọ!

- Akụkụ nha -

Okwu ikpe SMD ndị a dịkwa maka IR LED, UV LED, Blue SMD LED, Red SMD LED, Amber LED ect.

- Emitting Agba -

- Ọdụdọ oke -

Oke oke ruru na Ta = 25 ℃

Parameter	Symbol	Rating
Power Dissipation	Pd	230mW
Pulse Forward Current	IFP	350mA
Forward Current	IF	100mA
Reverse Voltage	VR	5V
Junction Temperature	Tj	115°C
Operating Tempertature	Topr	-40 - +80°C
Storage Tempertature	Tstg	-40 - +100°C
Soldering Temperature	Tsol	260°C
Electro-Static-Discharge(HBM)	ESD	2000v
Warranty	Time	5Years
Antistatic bag	Piece	2000Back
*Pulse Forward Current Condition:Duty 1% and Pulse Width=10us.
*Soldering Condition:Soldering condition must be completed with 3 seconds at 260°C

Njirimara anya na eletriki ( T c = 25 ℃ )

Parameter	Symbol	Min	Typ	Max	Unit	Test Condition
Forward Voltage	VF	1.6		2.2	V	IF=100mA
Pulse Forward Voltage	VF		2.8		V	IFP=350mA
Radiant Intensity	IE	25		32	mw/sr	IF=100mA
Peak Wavelength	λP	890	900	910	nm	IF=100mA
Total Radiated Power	PO		4.2		mw	IF=100mA
Half Width	Dl		50		nm	IF=100mA
Viewing Half Angle	2q1/2		±60		deg	IF=100mA
Reverse Current	IR			5	uA	VR=5V
Rise Time	Tr		600		ns	IF=100mA
Fall Time	Tf		300		ns	IF=100mA
*Luminous Intensity is measured by ZWL600.
*q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
*lD is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.

- 900nm ikanam -

- Njikọ Njikọ Ọlaedo -

- mbukota -

*Anyị na -etinye ya na ngwugwu oghere mgbe ejiri ya teepu dị ka ụda

- Ngwa -

- Ikanam metụtara -

- Mmepụta -

- Jiri -